View Single Post
Old 06-13-2018, 10:18 AM   #7
Marshall V. Daut
Senior Member
 
Join Date: Apr 2011
Location: Davenport, Iowa
Posts: 2,071
Default Re: steering box mounting frame holes

You might try fitting the spacer bushings used in the original style front radius ball mounting kit. With a little rattail filing of the holes in the frame, you might be able to slip the spacers in so that the bolts will tighten up against the frame. The steering box bolts are the same 3/8" size as the longer, special wishbone mounting bolts. If the spacers fit inside the enlarged frame holes after some judicious rat tail filing, simply cut thinner wafers from the spacers and possibly Crazy Glue them in place so that they don't come out while assembling the steering box and bolts to the frame.
Marshall
Marshall V. Daut is offline   Reply With Quote