View Single Post
Old 02-06-2019, 09:31 AM   #4
koates
Senior Member
 
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,079
Default Re: 1936 Generator Pulley Alignment

Correct as above post. That is a much later generator made to work with a three unit voltage regulator. The gen housing and front end bracket are quite different to an original 36 generator which had the round cut out on top of it and a cover band to cover the brush access openings. Armature length is shorter on the 36 gen. Regards, Kevin.
koates is offline   Reply With Quote