View Single Post
Old 02-06-2019, 09:28 AM   #3
terry
Senior Member
 
Join Date: May 2010
Posts: 267
Default Re: 1936 Generator Pulley Alignment

I agree with with John. You're thinking that way too. You're rebuilt generator doesn't have the hole on top where the wires come out. You need an earlier generator. I think ones from 32 up to 39 standard standard are needed and can be rebuilt the same way, but the 2 wires for generator and field will come out that hole in the top and go to a 12v regulator.
terry is offline   Reply With Quote