The Ford Barn - View Single Post - Oversize and Undersize Aluminum Cam Gears

Jim Brierley · 10-06-2019, 11:07 AM

I needed a .005" undersize gear a long time ago, Dan made one for me and it worked fine.
I run his gears in my race engine, never a problem, and I have 140 lbs. spring pressure and turn the engine 6,000 RPM!

10-06-2019, 11:07 AM	#5
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,085	Re: Oversize and Undersize Aluminum Cam Gears I needed a .005" undersize gear a long time ago, Dan made one for me and it worked fine. I run his gears in my race engine, never a problem, and I have 140 lbs. spring pressure and turn the engine 6,000 RPM!