View Single Post
Old 09-24-2019, 12:00 PM   #16
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: Can the TDC pin be off by 90 Degrees?

As for CAM timing , there is only one way that the cam timing gear can be installed without alteration of the two holes in the cam gear . There is a slight offset to the holes on the cam gear . I once saw where a person had rat tail filed one of the holes larger in an attempt to get the cam gear on . The person that rat tailed the hole , obviously didn't see the offset in the cam gear holes .

Last edited by Purdy Swoft; 09-24-2019 at 02:54 PM.
Purdy Swoft is offline   Reply With Quote