The Ford Barn - View Single Post

redmodelt · 08-24-2018, 09:29 AM

My PO; If the head is higher compression I would go with on of the made for Model T Strombergs and use the aluminum intake. I am not a fan of the NH's anyway. While they are easy to work on I personally, with some experience, think they are over rated. While I have not used the Holley G, it is reported that they are a better carb. Me I like the Kingston L4 and have used in the past; Kingston L4, Marvel (before they combined with Schebler) and Schebler carbs. You might also consider the Simmons straight thru.

08-24-2018, 09:29 AM	#4
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,341	Re: Carb model G vs NH My PO; If the head is higher compression I would go with on of the made for Model T Strombergs and use the aluminum intake. I am not a fan of the NH's anyway. While they are easy to work on I personally, with some experience, think they are over rated. While I have not used the Holley G, it is reported that they are a better carb. Me I like the Kingston L4 and have used in the past; Kingston L4, Marvel (before they combined with Schebler) and Schebler carbs. You might also consider the Simmons straight thru. __________________ I know the voices aren't real but damn they have some good ideas!