Quote:
Originally Posted by Brian SATX
You should hear a clunk when the starter releases. You may have to rock it 6-10 times. Did it start when you got it? Check to see if there is a master cut off someplace. Also, turn your headlights on. IF they work, it is most likely a starter issue.
|
I put it in second gear & was able to push the car backwards with no clunking. Just sounds like compression of the motor turning. No the car didn't run when I got it. Still not starting. I was thinking the same thing about a cut off switch, but can't seem to find one. The guy that did have it before me did do a bunch of extra wiring. Front & rear blinkers, secondary horn, he has to coils mounted on the firewall. One has nothing going to it. Not sure what that's all about.