Thread
:
Greasing
View Single Post
09-27-2019, 07:18 AM
#
3
deuce5wndw
Senior Member
Join Date: May 2010
Location: Liberty, KY
Posts: 901
Re: Greasing
No shouldn't have to jack it up. Usually it is because the grease is old and dried up in the fittings. Screw them out and clean them and while you have them out check that the grease hole in the bushing is lined up with the fitting.
deuce5wndw
View Public Profile
Send a private message to deuce5wndw
Find More Posts by deuce5wndw