The Ford Barn - View Single Post

Mart · 09-08-2019, 05:32 PM

^^ Ok if you have exposed plug connectors. If later type, fully covered plug caps, you wouldn't be able to do this.

If you do this, it is a good idea to touch the screwdriver to ground on the head before touching the exposed plug lead.

Mart.

09-08-2019, 05:32 PM	#17
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,745	Re: Intermittent sticking valve ^^ Ok if you have exposed plug connectors. If later type, fully covered plug caps, you wouldn't be able to do this. If you do this, it is a good idea to touch the screwdriver to ground on the head before touching the exposed plug lead. Mart.