The Ford Barn - View Single Post

Badpuppy · 04-14-2018, 01:57 PM

Check voltage at flasher x terminal. I had the same problem with my BV535 until I moved the feed from the brake switch connection up to the junction box on the firewall. Could be the new flasher needs a bit more V. Start the car and adjust the generator third brush with lights on and see if that helps.

04-14-2018, 01:57 PM	#5
Badpuppy Senior Member Join Date: Dec 2017 Location: Guthrie, OK Posts: 1,145	Re: Turn Signal Conundrum Check voltage at flasher x terminal. I had the same problem with my BV535 until I moved the feed from the brake switch connection up to the junction box on the firewall. Could be the new flasher needs a bit more V. Start the car and adjust the generator third brush with lights on and see if that helps.