The Ford Barn - View Single Post

Will D · 08-22-2020, 10:26 PM

The phenolic spacer is probably the issue. When I added one on my '38 the rods protrude 3/8" - 1/2" into the cab past their previous position on the dash. I just put the same thickness rubber washer in behind the knobs so it looks clean and if I remove the phenolic spacer the rods will fit as they did before.

08-22-2020, 10:26 PM	#15
Will D Senior Member Join Date: Feb 2020 Location: BC Canada Posts: 573	Re: Choke/Throttle rods The phenolic spacer is probably the issue. When I added one on my '38 the rods protrude 3/8" - 1/2" into the cab past their previous position on the dash. I just put the same thickness rubber washer in behind the knobs so it looks clean and if I remove the phenolic spacer the rods will fit as they did before.