The Ford Barn - View Single Post

51 MERC-CT · 11-10-2019, 09:07 AM

Did a couple of these many years ago.
As I recall the only tabs inside the door window channel were in the corners and the glass has to be sufficiently relieved to provide clearance.
The glass setting tape has to be the correct thickness in order for the glass to be installed in the frame channel.
Now if you are talking about the vent glass the glass still has to be relieved in the location of the pivots and the setting tape has to be the correct thickness.

11-10-2019, 09:07 AM	#2
51 MERC-CT Senior Member Join Date: May 2010 Location: East Hartford, Ct Posts: 5,898	Re: 1950 convertible door glass Did a couple of these many years ago. As I recall the only tabs inside the door window channel were in the corners and the glass has to be sufficiently relieved to provide clearance. The glass setting tape has to be the correct thickness in order for the glass to be installed in the frame channel. Now if you are talking about the vent glass the glass still has to be relieved in the location of the pivots and the setting tape has to be the correct thickness. __________________ DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 11-10-2019 at 09:15 AM.