The Ford Barn - View Single Post

flatjack9 · 10-20-2015, 05:24 PM

If it has a rough idle, that would definetly adversely effect low end torque and so would not be the best for a heavy car. Probably has tight lobe centers and a lot of overlap.

10-20-2015, 05:24 PM	#10
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,526	Re: Clay Smith cam ID? If it has a rough idle, that would definetly adversely effect low end torque and so would not be the best for a heavy car. Probably has tight lobe centers and a lot of overlap.