View Single Post
Old 09-26-2019, 12:03 PM   #3
Floats
Senior Member
 
Floats's Avatar
 
Join Date: Dec 2013
Location: Mossel Bay, about 300km from Cape Town
Posts: 475
Default Re: Welding a bead on the stub axle

Thanks Brent,
That has all been done, new king pins or spindle bolts and new bushes were fitted by a local engineering company.
The bushes were reamed and not honed with the result that they are not perfect and I assume the guy that did the job did not think a close fit was that important, being an old car.
As I mentioned, I have seen a post here where slight play could be fixed by a weld on the spindles.
Much appreciated.
__________________
Regards
Chris
Cape Town
28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC
Floats is offline   Reply With Quote