The Ford Barn - View Single Post

Alaska Jim · 01-19-2020, 08:48 PM

Back in the mid '70's, I had a '63 Ranchero with a 260,289 heads, aluminum high rise manifold and a 600cfm Holley with a c-4. I had a Sig Erson hi-flow 1 cam in it. it had a little lump to it, but it was streetable to me. I may have a different opinion now that I am not 25 years old any more. I do not remember the spec's on the cam, or if it is even made any more. you might ck it out and see if it is something you might be able to use if you can not find what you are looking for.

01-19-2020, 08:48 PM	#7
Alaska Jim Senior Member Join Date: May 2010 Location: Palmer, Alaska Posts: 1,575	Re: Trying to ID a FoMoCo camshaft Back in the mid '70's, I had a '63 Ranchero with a 260,289 heads, aluminum high rise manifold and a 600cfm Holley with a c-4. I had a Sig Erson hi-flow 1 cam in it. it had a little lump to it, but it was streetable to me. I may have a different opinion now that I am not 25 years old any more. I do not remember the spec's on the cam, or if it is even made any more. you might ck it out and see if it is something you might be able to use if you can not find what you are looking for.