The Ford Barn - View Single Post

GaryA · 04-15-2015, 05:08 PM

I'm told that everything lined up perfectly before the radiator was taken out to be re cored.

I took about an 18" piece of flat bar and set it on top of the rear motor mount, parallel to the frame to check for frame sag and the frame looks good.

04-15-2015, 05:08 PM	#7
GaryA Junior Member Join Date: May 2010 Location: Dublin, CA Posts: 9	Re: 29 radiator I'm told that everything lined up perfectly before the radiator was taken out to be re cored. I took about an 18" piece of flat bar and set it on top of the rear motor mount, parallel to the frame to check for frame sag and the frame looks good.