The Ford Barn - View Single Post

Kurt in NJ · 11-10-2019, 09:50 AM

If you take the belt off and put power to the output post the generator should "motor", if it doesn't there is a internal problem

If there are 2 wires coming out of inside one is a field ground that needs to be grounded unless it is connected to a oval cutout that has a voltage regulator too (many that were rebuilt got converted to this)

11-10-2019, 09:50 AM	#8
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,158	Re: Basic trouble shooting 32 generator If you take the belt off and put power to the output post the generator should "motor", if it doesn't there is a internal problem If there are 2 wires coming out of inside one is a field ground that needs to be grounded unless it is connected to a oval cutout that has a voltage regulator too (many that were rebuilt got converted to this)