View Single Post
Old 01-04-2019, 08:10 PM   #9
37 Coupe
Senior Member
37 Coupe's Avatar
Join Date: May 2010
Posts: 1,518
Default Re: Fort Wayne clutch claims setting is correct.

The pressure plate I sent them is an original or at least an older aftermarket before China was making them. I came up with the 11/16" dimension because that is what Brattons gauge for this is ,so I figured Brattons should know if that is what they are selling to people.I don't think 5/8" like Les Andrews book states or the 3/4" that original Ford clutch book states would make much difference but when you get to over an inch like Fort Wayne sets them you have lost 3/8"- 1/"2 movement in of the fingers which means your clutch may not be disengaging as much as it should.
"Never complain,never explain"... Henry Ford II
37 Coupe is offline   Reply With Quote