The Ford Barn - View Single Post

Gary Karr · 12-20-2019, 08:15 AM

Also, LB's instructions on finishing the bottoms of the vertical pieces is telling you to make sure that you finish them long enough to the subframe or scuff piece. You can cut your verticals longer and then trim the bottoms once in place. Remember to give yourself about 3/4" more fabric than tubing as that will get tucked in the tube to finish your ends.

12-20-2019, 08:15 AM	#19
Gary Karr Senior Member Join Date: Jun 2010 Location: San Diego, CA Posts: 1,486	Re: 29 Tudor windlace question Also, LB's instructions on finishing the bottoms of the vertical pieces is telling you to make sure that you finish them long enough to the subframe or scuff piece. You can cut your verticals longer and then trim the bottoms once in place. Remember to give yourself about 3/4" more fabric than tubing as that will get tucked in the tube to finish your ends.