Quote:
Originally Posted by geoford41
Do I need to remove the rear glass in my coupe to glue the headliner material or can i stuff the material into the rubber gasket with a little contact cement to help hold it in until I screw the rear garnish molding down? The headliner material is white vinyl.
|
Rear windows must be removed. Glue the lining in very well. I prefer 3M contact cement. Once it is very dry, using a razor, remove any material from the edge that the glass (seal) would push
against.
There's a lot of "pull" back there and as such, I'd be fearful of the 'tuck" approach being strong enough to last.
The window molding is designed to hold the windows in place, NOT hold the headliner.