The Ford Barn - View Single Post

SkimmerBob · 07-01-2019, 05:20 PM

I think I bought my swage tool from Snyders also. I did all 20 lugs and it worked fine and still looks fine. I used a 20 ton press. To get the old lugs out I was going to buy a $100 slugger bit (like an end mill kinda but with a hole trough the center.) For some reason I tried a Bi-Metal hole saw (about $8) and it worked great. Just thought I'd share this.
Good Luck!!

07-01-2019, 05:20 PM	#5
SkimmerBob Senior Member Join Date: Mar 2011 Location: Riverview, Michigan Posts: 127	Re: Is there a better swage tool? I think I bought my swage tool from Snyders also. I did all 20 lugs and it worked fine and still looks fine. I used a 20 ton press. To get the old lugs out I was going to buy a $100 slugger bit (like an end mill kinda but with a hole trough the center.) For some reason I tried a Bi-Metal hole saw (about $8) and it worked great. Just thought I'd share this. Good Luck!!