The Ford Barn - View Single Post

johnneilson · 12-08-2018, 12:58 PM

All,

there is a Saturn rod bearing that will just fit between the studs/bolts.
finish size on crank is 1.850
largest I could find and not have to move the main bolts.
also, if HP is above 150, it is wise to weld up flange on crank and machine for 2 pc chevy seal.

J

12-08-2018, 12:58 PM	#7
johnneilson Senior Member Join Date: Jun 2010 Location: 34.22 N 118.36 W Posts: 1,057	Re: Best Rear Main Seal All, there is a Saturn rod bearing that will just fit between the studs/bolts. finish size on crank is 1.850 largest I could find and not have to move the main bolts. also, if HP is above 150, it is wise to weld up flange on crank and machine for 2 pc chevy seal. J __________________ As Carroll Smith wrote; All Failures are Human in Origin.