The Ford Barn - View Single Post - I’m rebuilding my first Flathead and I have some questions

Brian · 07-20-2021, 11:34 PM

I meant there's a gap between the cam heel and the lifters

Yes, but if you pushed the lifter down until it contacted the heel of the cam, the gap would then be between top of lifter and bottom of valve stem....don't worry

07-20-2021, 11:34 PM	#4
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,829	Re: I’m rebuilding my first Flathead and I have some questions I meant there's a gap between the cam heel and the lifters Yes, but if you pushed the lifter down until it contacted the heel of the cam, the gap would then be between top of lifter and bottom of valve stem....don't worry __________________ Unfortunately, two half wits don't make a whole wit!