The Ford Barn - View Single Post

woodypecker · 01-05-2018, 07:03 PM

I have a 400jr and it is a pita to adjust. I have to measure the clearance then raise the lifter in the bore and adjust by trial and error. So drill the holes if it is not too late.

01-05-2018, 07:03 PM	#14
woodypecker Senior Member Join Date: Jun 2012 Location: Clarkston, Michigan Posts: 239	Re: Adjusting Flathead V8 Lifters I have a 400jr and it is a pita to adjust. I have to measure the clearance then raise the lifter in the bore and adjust by trial and error. So drill the holes if it is not too late.