The Ford Barn - View Single Post

swoopNZ · 02-05-2021, 01:53 AM

Find yourself a small steel ring gasket - the type used in the oilfield on flanges.
About 4 inches diameter.
Cut about 2 inches out of it then slip it behind the wheel.
You can then use a common 3 legged puller to remove it without damaging the hub of the steering wheel..
" It worked for me "

02-05-2021, 01:53 AM	#5
swoopNZ MEMBER EMERITUS Join Date: May 2010 Location: New Zealand Posts: 1,380	Re: How to remove steering wheel? (1938) Find yourself a small steel ring gasket - the type used in the oilfield on flanges. About 4 inches diameter. Cut about 2 inches out of it then slip it behind the wheel. You can then use a common 3 legged puller to remove it without damaging the hub of the steering wheel.. " It worked for me "