View Single Post
Old 02-20-2020, 02:44 PM   #7
d.j. moordigian
Senior Member
 
d.j. moordigian's Avatar
 
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
Default Re: Hand throttle notches

IF you look at the back side of the rods where it touches the "V" notches,..they will be worn flat. That area is supposed to be round. Either weld up the originals and reshape
then replate...OR buy repops and hope they fit..
d.j. moordigian is offline   Reply With Quote