Quote:
Originally Posted by Jacksonlll
Your return pipe should be a little more rearward. Move it back a bit and that will give room for your generator to swing out. Then get a belt that is a little longer and don’t run the tension very tight. No need to and a tight belt can cause problems. Just tight enough to run things. Good luck.
|
I think JacksonIII is correct. I had the same problem. Slide the water pipe back. As it goes into the engine side hose farther it will straighten out. It also appears to be slightly twisted as the valve should point straight down. Easy to try first before changing out a lot of parts.