[KULTULZ]

This should answer the questions - https://www.cokertire.com/blog/tube-tech


WHEEL FLAPS - https://www.cokertire.com/accessorie...ers/flaps.html


WHEEL RIM STRIPS - https://www.cokertire.com/accessorie...im-strips.html


ADDENDUM (Fr. For More Info) -

Wire wheels require a little extra care when mounting tires. First, regardless of the type of tire you purchase, wire wheels require the use of an inner tube. For clarification, "tubeless tires" mean the tire bead is designed to provide an airtight seal against the rim. It does not mean you cannot use an inner tube. Of course tires produced prior to the tubeless technology will always require an inner tube as will any wire wheel. This may seem obvious, but whenever you are mounting new tires on wire wheels remember to use new inner tubes. Inner tubes will degrade over time just like tires, and while the tube may look good, you should still use new tubes.

SOURCE - https://www.hotrod.com/articles/moun...wire-wheels-2/