Re: Would you try to save this?
Quote:
Originally Posted by flatheadmurre
I would check the cylinder walls before going much over 3 3/16 on a 3 1/16 block...at 3 3/16 +040 you usually start getting real thin walls on good blocks...
|
Look at the picture of the block its a 59A so I would imagine 3-3/16 bore stock not 3-1/16.
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
|