The Ford Barn - View Single Post

Gary Tosel · 07-29-2019, 05:55 PM

I was able to get a broken key out of a 34 ignition lock by soaking the key area and using a screw driver to move the tumbler back and forth. Then with a sharp pick I was able to pry against the tooth side of the key to remove the broken part. It is worth a try.

07-29-2019, 05:55 PM	#2
Gary Tosel Senior Member Join Date: May 2010 Location: Minnesota Posts: 1,138	Re: 34 ignition lock I was able to get a broken key out of a 34 ignition lock by soaking the key area and using a screw driver to move the tumbler back and forth. Then with a sharp pick I was able to pry against the tooth side of the key to remove the broken part. It is worth a try.