The Ford Barn - View Single Post

30Murray · 09-30-2011, 02:22 PM

I would first try a larger fuel line with no sediment bowl. With only 3" of head and gravity feed, you can only flow so much through the stock steel line. The fuel tank is essentially just an extension of the bowl in the carb. By the way, I've had no experience with this myself, just with water piping design which is the same principle.

09-30-2011, 02:22 PM	#16
30Murray Senior Member Join Date: Jun 2010 Location: Vancouver B.C. Posts: 111	Re: Tuning problem with modified A engine I would first try a larger fuel line with no sediment bowl. With only 3" of head and gravity feed, you can only flow so much through the stock steel line. The fuel tank is essentially just an extension of the bowl in the carb. By the way, I've had no experience with this myself, just with water piping design which is the same principle.