The Ford Barn - View Single Post - How to remove the U-Joint from my Trans?

svm99 · 04-12-2020, 08:55 PM

Use a 9/16 socket on an extension thru the splines, work your socket around until it fits on a bolt head, turn CCW until you remove the bolt, then slide the ujoint from the trans shaft. Put your trans in low or reverse to help prevent it from turning. Good luck!

04-12-2020, 08:55 PM	#2
svm99 Senior Member Join Date: May 2010 Location: Garlic Country of CA Posts: 537	Re: How to remove the U-Joint from my Trans? Use a 9/16 socket on an extension thru the splines, work your socket around until it fits on a bolt head, turn CCW until you remove the bolt, then slide the ujoint from the trans shaft. Put your trans in low or reverse to help prevent it from turning. Good luck!