View Single Post
Old 04-09-2018, 09:15 AM   #2
JSeery
Senior Member
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 14,379
Default Re: Voltage Readings

There should be very little voltage loss between the battery and the ignition switch and again between the ignition switch and the ballast resistor. So, I would measure the voltage at the battery and/or generator output. The voltage at either side of the ignition switch should be slightly less that the battery/generator output. Ignition switches can be a source of voltage drop if the contact points need cleaning.
JSeery is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)