Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by 1crosscut
If one of your 4 contact points on the distributor body shows that the rotor has contacted it you will need to adjust the rotor contact to distributor body contact spacing so they are all correctly spaced. Bend the tip of the rotor to adjust the distance. If one or two of the gaps end up being too close while the others are correct then carefully file those contact points on the distributor body to widen out the gaps to match the others. I don't off hand remember the gap and am away from home to check my info to give you the correct gap but others will chime in I'm sure.
|
0.025", I believe.
JayJay