The Ford Barn - View Single Post

Pa Joe · 05-07-2011, 08:50 PM

Jim, Do you have a wiring diagram for the switch? The turn signal switch I installed has 7 wires. they were numbered 1 thru 7. On the flasher there should be a + sign, that goes to the power source with a 5 amp fuse. The other terminal on the flasher should be marked with a P for indicator lamp. The other terminal marked L is for the flasher wire connected to the turn signal switch. My flasher didn't have a wire coming out of the top. My guess would be for a ground. You need the diagram for the switch.

05-07-2011, 08:50 PM	#3
Pa Joe Senior Member Join Date: May 2010 Location: Pittsburgh Pa Posts: 188	Re: wireing help please Jim, Do you have a wiring diagram for the switch? The turn signal switch I installed has 7 wires. they were numbered 1 thru 7. On the flasher there should be a + sign, that goes to the power source with a 5 amp fuse. The other terminal on the flasher should be marked with a P for indicator lamp. The other terminal marked L is for the flasher wire connected to the turn signal switch. My flasher didn't have a wire coming out of the top. My guess would be for a ground. You need the diagram for the switch.