Quote:
Originally Posted by robert dick
used to run a 3 7/16 x 4 flatmotor @ Sanford Maine back in the mid 50's, always wondered if i met Walt at one of these meets-- i had purchsed the block from a fellow named Garvin Cooper @ new england speed--he used to run @ Norwood Arena.
|
I have an 8BA block that is bored to 3 7/16". The pistons are cast and they are for the 3 3/4" stroke. That's about 275 cubes the hard way. The block is in tough shape though, gonna take some TLC to bring her back to life.