Quote:
Originally Posted by Macdozer
It looks like with the longer springs I will need the retainer and the lock keys only. I will not need the "sleeve"
I will measure the springs I took out and the new ones I got.
Are the retainers used with the different valve assemblys all the same or are they all different?
Sent from my iPad using Tapatalk
|
Hi Mac, you need the retainers that don't use the "roto-caps", they are the 1 piece deals.
Like I mentioned above, you can alter the spring hgts/pressures by using the valve locks if needed.
Thanks, Gary in N.Y.
P.S. Here's a shot of both setups, you should use the one on the left side!