03-01-2020, 03:16 PM
|
#25
|
Senior Member
Join Date: Jul 2012
Location: Australia/USA/EU/Soviet Russia
Posts: 1,105
|
Re: When going for SCAT crank should you lighten flywheel? If so, how much?
Quote:
Originally Posted by wensum
These are made in New Zealand " These dampers are made by Murray Horn in Levin N.Z. His Company is Engine Restorations Ltd. His email is [email protected]
Murray says this is the best way to contact him.
The dampers are a straight fit to replace the standard Model A pulley. An added benefit is a shallow reverse scroll in the rope seal area to help contain oil."
The cost was around NZ$300 (much cheaper in US dollars.) The pulley probably requires the radiator to be removed and the front of the engine lifted above the front cross member. the pulley is a little deeper than the original pulley and comes very close to the front spring U bolts and so the fan belt needs to be fitted at the same time.
|
Price including shipping is now 300 USD
|
|
|