The Ford Barn - View Single Post

DavidG · 01-24-2019, 08:21 PM

Karl,

Sorry, but I'm away from my coupe so I cannot provide the requested dimensions. On the other hand If the body and deck lid are original, those locations are sort of built in. Every '32 coupe or roadster has a reinforcement doubler welded to the side of the drain channel on the left regardless of whether or not the body was eventually equipped with a rumble seat. There's a dimple in the center of that doubler where the hole goes for the bolt used for the deck lid support. The lids (all lids, whether rumble or deck) have a depressed area on the left side where the clinch nuts are located when deck lid equipped. When rumble equipped there are no clinch nuts, but the depression for them is there.

01-24-2019, 08:21 PM	#3
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: 1932 3 window trunk prop location? Karl, Sorry, but I'm away from my coupe so I cannot provide the requested dimensions. On the other hand If the body and deck lid are original, those locations are sort of built in. Every '32 coupe or roadster has a reinforcement doubler welded to the side of the drain channel on the left regardless of whether or not the body was eventually equipped with a rumble seat. There's a dimple in the center of that doubler where the hole goes for the bolt used for the deck lid support. The lids (all lids, whether rumble or deck) have a depressed area on the left side where the clinch nuts are located when deck lid equipped. When rumble equipped there are no clinch nuts, but the depression for them is there.