View Single Post
Old 01-22-2016, 01:43 PM   #3
ccb360
Member
 
Join Date: May 2014
Location: Portsmouth, VA
Posts: 66
Default Re: Disconnect Switch Handle Extension

Mounted this type switch recently to seat frame just behind left foot area. No handle extension needed. Used 1/2" conduit punch for the switch clearance hole and also for passing cables (via insulated bushings) through floor pan. Routed cables over cross member at frame under floorboard. One cable to 6V battery (+) and other cable to frame ground connection with a jumper to transmission cover bolt. Switch can be readily operated while seated and is out of general view.
ccb360 is offline   Reply With Quote