The Ford Barn - View Single Post

PeteVS · 10-15-2011, 11:31 PM

In a post quite some time ago, Richard Lacy mentioned a seal that had a thin (I think it was 1/8" or so) flange that got bolted between the torque tube flange and the banjo. The seal was carried in that flange. That did away with all the torque tube ID variations.

10-15-2011, 11:31 PM	#11
PeteVS Senior Member Join Date: May 2010 Location: FP, NJ Posts: 2,771	Re: Banjo to Torque Tube Oil Leak Solution In a post quite some time ago, Richard Lacy mentioned a seal that had a thin (I think it was 1/8" or so) flange that got bolted between the torque tube flange and the banjo. The seal was carried in that flange. That did away with all the torque tube ID variations. __________________ Don't never get rid of nuthin!