Quote:
Originally Posted by Werner
Hallo und guten Tag,
just made some pictures to shows the external work. The pinkish-white discoloration are residues from the final crack-tightness test.
I am currently a little ill, therefore I'l show the next step, when the seam is cleaned.
|
Make sure you knock the weld spalls off the springs and clean everything really well.
Only real problem I ever had with cast was cooking the oils and contaminates out of the metal before striking an arc. Preheat it until a pine stick smokes on contact, Mig it hot and low feed and keep it hot with a torch or salamander while it cools.