View Single Post
Old 04-16-2017, 11:37 PM   #26
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
Default Re: Steering dampener

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by daveymc29 View Post
I would never use a steering damper. they will bend and re-bend your tie-rod as you drive. I took mine off and tossed it for that reason, on a truck I had, then fixed the problem. They are a sorry excuse for not fixing what is wrong with your machine. Just my humble opinion.
Dave,
Some dampers were made with a WAY TOO HEAVY a shock & will sometimes bend the tie rod. If the shock resistance is proper, they work well. Several later cars had them from the FACTORY, even.
DON'T condemn them as a general rule, when they were set up with the WRONG resistance.
TOO OFTEN, folks just REPEAT the same old RHETORIC, like, "IT'S the CONDENSOR or THE COIL, ETC, ETC" (The Dog calls that, "PARROT TALK")
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote