View Single Post
Old 02-23-2014, 01:23 PM   #26
Growley bear
Senior Member
 
Join Date: Apr 2012
Posts: 777
Default Re: steering box rebuild.

A tip for someone who may not have disassembled a two tooth steering box. I tried following the directions to remove the sector shaft end play adjustment screw but the screw won't back out as the end that contacts the sector shaft is usually somewhat mushroomed. I remove the sector shaft housing and shaft first then remove the lock nut from the adjusting screw and remove the screw through to the inside of the housing.

Chet
Growley bear is offline   Reply With Quote