The Ford Barn - View Single Post

Tom Endy · 10-23-2017, 01:43 PM

A suggestion: Coat the flywheel mounting bolt heads with a liberal coating of chalk. Put the disk against the flywheel surface and rotate it back and forth to see if any chalk transfers onto the springs.

Excellent safety wire job. I have never been able to do that well.

Tom Endy

10-23-2017, 01:43 PM	#15
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,131	Re: Knocking after installing new flywheel A suggestion: Coat the flywheel mounting bolt heads with a liberal coating of chalk. Put the disk against the flywheel surface and rotate it back and forth to see if any chalk transfers onto the springs. Excellent safety wire job. I have never been able to do that well. Tom Endy