View Single Post
Old 10-22-2017, 04:14 PM   #8
Senior Member
newshirt's Avatar
Join Date: Jan 2011
Location: Colorado Springs
Posts: 867
Default Re: Knocking after installing new flywheel

Originally Posted by Jim M View Post
Did you adjust the fingers on the pressure plate? That might be causing it?
No. I measured them to be 0.75" below the pressure plate surface, and thought that was okay. The clutch petal is adjusted to be 1" of free play before the throw-out bearing contacts the pressure plate fingers. They all contact simultaneously.
Ray White

Last edited by newshirt; 10-22-2017 at 04:28 PM.
newshirt is offline   Reply With Quote