Thread: New block
View Single Post
Old 05-17-2017, 07:11 AM   #166
Ol' Ron
Senior Member
 
Ol' Ron's Avatar
 
Join Date: May 2010
Location: Chester Vt
Posts: 6,820
Default Re: New block

Here's a modification that might solve the 21 stud issue. If the deck thickness is increased to 1/2" along the bottom of the block, then you can drill the 4 holes needed for the 21 stud head. Unfortunately you'd still have to use block off plates on the front for the early block replacement. But it does solve one issue.
Ol' Ron is offline   Reply With Quote