Re: My 1930 Model A
I'm currently working on getting everything wired up. I found my volt meter and checked the voltage at all the locations that 1955cj5 said, and I'm getting 6.15V +/-. I even went so far as to check the wire ends and I'm getting the same readings there as well. That being said, the headlights and driving lights won't come on.
I put the bulbs in a separate pig tail and touched the wires to the post on the starter and grounded it and they work fine. But connected to the headlight wires is a no go.
Sent from my iPhone using Tapatalk
|