Thread
:
1/4 inch hole in shifting tower sloppy
View Single Post
08-01-2020, 08:11 PM
#
3
alanwoodieman
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,965
Re: 1/4 inch hole in shifting tower sloppy
I have seen those holes and the slots drilled/ground to fit 5/16" drill bits, I would prefer you use the drill bit as they last a long time
alanwoodieman
View Public Profile
Send a private message to alanwoodieman
Find More Posts by alanwoodieman