The Ford Barn - View Single Post

fredeuce · 11-28-2021, 01:57 AM

I conducted the test this afternoon by setting it up in the drill press on the slowest speed and using 10-30W oil. Once the air was out the needle belted the peg on the gauge quite hard . It is a 60 psi gauge. I think we are good to install it now and see how it performs on the running engine.

11-28-2021, 01:57 AM	#20
fredeuce Member Join Date: May 2010 Location: South Australia Posts: 50	Re: Oil pump pressure test I conducted the test this afternoon by setting it up in the drill press on the slowest speed and using 10-30W oil. Once the air was out the needle belted the peg on the gauge quite hard . It is a 60 psi gauge. I think we are good to install it now and see how it performs on the running engine.